I need a couple sling swivels for a BM style side swivel thingy. I think I also need a different length long screw.
ANYONE? ANYONE?
I need a couple sling swivels for a BM style side swivel thingy. I think I also need a different length long screw.
ANYONE? ANYONE?
You might try Bruce Hose.
[email protected]
Sean send me a picture of the parts that you do have and I will see what I have available .
[email protected]
M1CC #328
Mike,
Timmy has my buttpads. All I have is the rubber buttpad with the swing out door - no screws or swivel
Sean,
Check this out on EBAY
ITEM # 140745577726
I think you will be happy!
Buzzy
Buzzy,
I saw those except the hole in the swivel does not appear to be threaded and there is no piece for the long screw to go into. What is that short screw for? and aren't the threads on the italian swivels different from USGI?
Sean, the screw is different. There is also a flat washer, a threaded bushing, and a square washer. Over-friggen complicated. I can probably get all the dimensions but then we would need Tim to machine the parts and since we're from Welch West Virginia I don't know.
When dealing with liberals, always attribute to malice what would ordinarily be attributed to incompetence.
"Of course it won't be easy; nothing worthwhile ever is. That is why I have always failed where others have succeeded."-Clouseau
Sean
That is the swivel for the folding stock I do believe. The swivel may be correct, but there is a threaded bushing and a rectangular anti spin washer with a D shaped hole that the bushing fits in. Once inseted in the slot the retainer allows the screw to do it's screw thing and the swivel to rotate the 90 degrees around the bushing in the stock slot. So what you really need is 4 parts not 2. If my camera was working i would takw a photo of the one
I have for you.
Mike
Originally Posted by seaninmich
Staten Island German Martial Arts (S.I.G.M.A.)
http://www.sigmanewyork.webs.com/
Time to feed the pigs!!!!!!
The sword of time will pierce our skins
It doesn't hurt when it begins
But as it works its way on in
The pain grows stronger...watch it grin.
here are some pictures of minebm swivel 1.jpgbm swivel2.jpgbm swivel4.jpgbm swivel3.jpg
I think that is what I need! is that what you got from the listing you posted above?
What about the threads? do they match a USGI buttplate screw?
Posting Permissions
Reply With Quote