-
WTS / WTT Mini-G OpRod
I have a spare Mini-G Oprod that Tim made up for me. I'm going to switch the rifle to a Standard Parts Drop Down Gas Cylinder so I can mount an Ultimak rail easier. Since the Oprods need to be straight for those gas cylinders this is not going to do me much good.
$175 shipped.
Justin
Last edited by jbkf1003; 12-09-2013 at 03:17 PM.
-
FYI, don't know if we've talked about his or not. Your old bent oprod may be able to be bent straight and work on the drop down gas cylinder. There is some risk in doing that but the odds are that it would work.
-
Yeah we did. I'll probably send 2 when it goes in, The one in the rifle, and the shortened Italian Tipo2 rod I have. Hopefully they'll both bend well and I'll have a spare, if not one should work...
-
Junior Cadet
- Rep Power
- 0
Is your op rod still for sale? My tanker build is turning into Mini build. Thanks for your time, Ed
-
Sir it is not, Sorry. I decided to a another build, a Mini-G Mag Fed build, and will need it. If you have an oprod now on the tanker I would venture a guess that Tim would be able to use it for your build.
Justin
-
Junior Cadet
- Rep Power
- 0
No problem, thanks and good luck with your builds
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote