Results 1 to 7 of 7

Thread: Mauser Rear Sight Base Removal

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Cadet
    Join Date
    Mar 2019
    Posts
    11
    Rep Power
    0

    Mauser Rear Sight Base Removal

    Awhile back, had to use a propane torch to un solder the rear sight base on a barreled action. Is there any risk that it damaged the heat treat on the receiver ring? It was hot to the touch but didnÂ’t change colors.

  2. #2
    Moderator Punch The Clown's Avatar
    Join Date
    Apr 2011
    Posts
    3,858
    Rep Power
    63
    Safe. They are soldered on to begin with.
    When dealing with liberals, always attribute to malice what would ordinarily be attributed to incompetence.

    "Of course it won't be easy; nothing worthwhile ever is. That is why I have always failed where others have succeeded."-Clouseau

  3. #3
    Junior Cadet
    Join Date
    Mar 2019
    Posts
    11
    Rep Power
    0
    Thank you! ItÂ’s a Turk Mauser-large action small threads. Any caliber restrictions ?

  4. #4
    Moderator Punch The Clown's Avatar
    Join Date
    Apr 2011
    Posts
    3,858
    Rep Power
    63
    I am not well versed in Mausers. I have re-barreled a couple nut that was years ago. Maybe someone else has a little more experience?
    When dealing with liberals, always attribute to malice what would ordinarily be attributed to incompetence.

    "Of course it won't be easy; nothing worthwhile ever is. That is why I have always failed where others have succeeded."-Clouseau

  5. #5
    Junior Member
    Join Date
    May 2016
    Posts
    64
    Rep Power
    8
    They used a soft solder on the front and rear sight bands so it won't take much to get it flowing

  6. #6
    Moderator Eli's Avatar
    Join Date
    Apr 2011
    Posts
    1,107
    Rep Power
    26
    There's a web page or few about re-barrelling those, but I don't recall the caliber restrictions.
    I miss those being $39 + shipping from Navy Arms, complete with bayonet and pounds of cosmoline!

    Eli

  7. #7
    Junior Member
    Join Date
    May 2012
    Posts
    73
    Rep Power
    12
    Is it German made or Turkish made? What caliber was it originally designed for? Most importantly what is the condition of the action?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •