-
Whats your guys take on shooting reloads with split necks.
I got done loading some 308 ammo (125gr Hornady SST over H4895). I don't recall the charge weight off the top of my head, but it's not hot. About 25% of my loaded rounds (lake city once fired brass) has some small neck splits after loading. Would you guys shoot these? I don't really want to pull them and risk deforming the polymer tip during the process. They seem to hold neck tension.
I think this brass was MG fired, and didn't hold up to the resizing well.
Would you guys shoot them? I'd load them one at a time while sighting in my Mini-G and not risk recoil setting the bullets back.
You hear all kinds of horror stories of how a small split can pressure cut your chamber, ect, ect, I don't see how that would be the case shooting 10 of them. I don't see how there would be a safety issue either, but correct me if I'm wrong.
Justin
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules