Is the wrench deminsioned wrong, is the receiver, or am I doing it wrong?
100_1112.jpg
100_1113.jpg
100_1114.jpg
100_1115.jpg
Eli
What Is The Problem Here?
Is the wrench deminsioned wrong, is the receiver, or am I doing it wrong?
100_1112.jpg
100_1113.jpg
100_1114.jpg
100_1115.jpg
Eli
I don't know, never seen a receiver wrench like that.
It's the one a guy sells on the CMP forums, with good reviews. His photos:
1D1D86AE-0FC4-41E4-896E-F8626ADC851E_zpsncsqvdnb.jpg
1D6017AB-BCEC-4344-85BB-D94FD8D365C4_zpsbe21jpa5.jpg
67C013E3-A9DC-4F3C-93E1-841BDC841230_zpsdcrvvzmj.jpg
A5C5B417-2453-4D4F-A4B0-65CE57F086AD_zpsw4ycguww.jpg
Eli
It's hard to tell from your first picture due to the glare from the flash,
but it looks like the cut-outs in the wrench may be slightly out of spec.
John
Don't worry if plan "A" fails, there are still 25 other letters in the alphabet.
Looking for S/A bayonets s/n 922033 & 1045220
Proud Member of M1CC #112
Well Eli, it appears you have trouble on that one friend.
Just my luck...Originally Posted by timshufflin
Eli
I got a message from the maker of the wrench, he's sending a replacement out ASAP. I may get a receiver to you yet, Tim!
Eli
I had to adjust the slots on mine, as some recievers seem to have a very slight difference...But he missed the boat on that one....
He messaged me this morning that he'd already sent out a replacement, so I'm happy - especially since I hadn't asked for one yet!
Eli
UPDATE: I should've posted this earlier, but the maker went above and beyond to make this right! I didn't even contact him, he saw a posting online and contacted me, and promptly sent a replacement. Some slight tolerance stacking caused the problem, the wrench has been revised to prevent it.
Eli
Posting Permissions
Reply With Quote