WTB - need BM butt swivel

[seaninmich]

I need a couple sling swivels for a BM style side swivel thingy. I think I also need a different length long screw.

ANYONE? ANYONE?

[buzzy]

You might try Bruce Hose.
[email protected]

[mikebaker1129]

Sean send me a picture of the parts that you do have and I will see what I have available .
[email protected]

[seaninmich]

Mike,

Timmy has my buttpads. All I have is the rubber buttpad with the swing out door - no screws or swivel

[buzzy]

Sean,
Check this out on EBAY
ITEM # 140745577726
I think you will be happy!
Buzzy

[seaninmich]

Buzzy,

I saw those except the hole in the swivel does not appear to be threaded and there is no piece for the long screw to go into. What is that short screw for? and aren't the threads on the italian swivels different from USGI?

[Punch The Clown]

Sean, the screw is different. There is also a flat washer, a threaded bushing, and a square washer. Over-friggen complicated. I can probably get all the dimensions but then we would need Tim to machine the parts and since we're from Welch West Virginia I don't know.

[axemurderer]

Sean

That is the swivel for the folding stock I do believe. The swivel may be correct, but there is a threaded bushing and a rectangular anti spin washer with a D shaped hole that the bushing fits in. Once inseted in the slot the retainer allows the screw to do it's screw thing and the swivel to rotate the 90 degrees around the bushing in the stock slot. So what you really need is 4 parts not 2. If my camera was working i would takw a photo of the one
I have for you.

Mike


Buzzy,

I saw those except the hole in the swivel does not appear to be threaded and there is no piece for the long screw to go into. What is that short screw for? and aren't the threads on the italian swivels different from USGI?

[buzzy]

here are some pictures of mine460461462463

[seaninmich]

here are some pictures of mine460461462463



I think that is what I need! is that what you got from the listing you posted above?


What about the threads? do they match a USGI buttplate screw?

[buzzy]

I tore my assembly apart to take the pictures.
The long screw has different threads and will not work in a USGI swivel.
Just trying to help.

[seaninmich]

I tore my assembly apart to take the pictures.
The long screw has different threads and will not work in a USGI swivel.
Just trying to help.


I think that's the best I can do. IIRC, the guinea screw is shorter than a USGI screw, but you have to use a USGI screw if you use a USGI profile stock because the distance from the swivel to butt is longer

[seaninmich]

the ebay link you posted came with the bushing and washer?

[buzzy]

http://i.ebayimg.com/t/BM-59-REAR-STOCK-SWIVEL-and-Screw-UNISSUED-GI-/00/s/OTYwWDEyODA=/$(KGrHqNHJBEE-b3RQmhiBPnNb64!W!~~60_57.JPG
Here is the one from ebay. The screw looks different.
I think the bushing could be re-tapped to accept a GI Screw.

[seaninmich]

http://i.ebayimg.com/t/BM-59-REAR-STOCK-SWIVEL-and-Screw-UNISSUED-GI-/00/s/OTYwWDEyODA=/$(KGrHqNHJBEE-b3RQmhiBPnNb64!W!~~60_57.JPG
Here is the one from ebay. The screw looks different.
I think the bushing could be re-tapped to accept a GI Screw.


no bushing in that pic. is this the guy you got yours from?

[buzzy]

Mine came in a SARCO kit.

[buzzy]

Shaun,
Check your PMs

[mikebaker1129]

Sean are the pics Buzzy posted the parts you need ?
A USGI screw will not work with the BM59 swivel,but a BM59 screw will. I have the parts if you are still looking $22 for the set.
MB

[seaninmich]

Sean are the pics Buzzy posted the parts you need ?
A USGI screw will not work with the BM59 swivel,but a BM59 screw will. I have the parts if you are still looking $22 for the set.
MB



I need everything for the ass end except the buttpad and trap door. I need both screws, swivel, grommet, washer, fizzle, fazzle, the doo-kickey, and the flugelbinder

you have more than one set?

[mikebaker1129]

Yes 2 set for $50 shipped .