PDA

View Full Version : Full Size Garand in 35 Whelan



baxterdisaster
07-28-2012, 01:36 AM
Tim,

Have you ever produced a non-G garand in 35 Whelan?

timshufflin
07-31-2012, 05:56 PM
No sir. Easy to do though. Send your barreled receiver right to Clearwater reboring. http://www.deltagunshop.com/clearwater_reboring/index.html

Tell them you want them to throat it too.

When you get it back, add a Schuster, start with very little gas, start shooting.

akriet
08-09-2012, 06:15 PM
Tim,

Are any mods necessary for feeding the 35 Whelen? Can you load a full enbloc, or maybe just a partial enbloc with a Holbrook device? Thanks.

timshufflin
08-09-2012, 06:41 PM
Tim,

Are any mods necessary for feeding the 35 Whelen? Can you load a full enbloc, or maybe just a partial enbloc with a Holbrook device? Thanks.

Depending on how deep your bullets are seated, you can load 5 or 6 rounds. No other device needed for standard Garand except schuster.

akriet
08-09-2012, 07:10 PM
Thanks much Tim.

paid4c4
08-09-2012, 09:54 PM
Tim, is there a noticeable difference in recoil between 30.06 and the 35 Whelen?
Bill

timshufflin
08-10-2012, 08:32 AM
Tim, is there a noticeable difference in recoil between 30.06 and the 35 Whelen?
Bill

None that I can tell.

axemurderer
08-10-2012, 11:30 AM
Tim, Any idea of what boring the barrel might cost. I kind of have an idea......

Mike

timshufflin
08-11-2012, 07:08 AM
Tim, Any idea of what boring the barrel might cost. I kind of have an idea......

Mike

To bore it, throat it, and ship it, I think they charge about $300 or so.

axemurderer
08-11-2012, 11:26 AM
Tim

You would not have a crappy .308 barrel laying around(not an E Barrel)? I may now be able to see my 8mm Garand come to being.

Mike


To bore it, throat it, and ship it, I think they charge about $300 or so.

timshufflin
08-11-2012, 03:07 PM
Tim

You would not have a crappy .308 barrel laying around(not an E Barrel)? I may now be able to see my 8mm Garand come to being.

Mike


I get lots of 30/06 barrels but I don't ever get .308 barrels.

axemurderer
08-11-2012, 07:38 PM
Tim

Do you think there is enough meat left in an E barrel to get that extra 6mm in chamber length?

Mike

timshufflin
08-11-2012, 09:36 PM
Axe man, I would ask whomever would be doing the barrel work. I really couldn't say.