1903-A4 Clone Project

[Punch The Clown]

I'm getting there. Tony G found me a beautiful 03-A3 (muzzle 0, throat 1) that was drilled and tapped for a Redfield Jr. and had a beautifully done bent bolt, but the handle was highly polished. Tim media blasted the bolt and then blackened-not parked-it. Next the scope was a freebie from Dogboysdad (Eric). Tim machined the WWII style step and the bevel in the Redfield Post-War scope base and parked it. The "C" stock came from the Louisville roadtrip. The upper handguard is raw wood. I'm not so sure it's walnut so I ordered a new one from the Collectors Source, but it's not here yet. I should have sanded it-maybe it is walnut? Anyway, here is where I'm at so far.

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1755_800x600_zpsb563b533.jpg

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1753_800x600_zps75ee05b2.jpg

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1752_800x600_zpsb6d7796a.jpg

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1751_800x600_zps354c41ce.jpg

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1750_800x600_zps204d4759.jpg

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1749_800x600_zps26606e91.jpg

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1748_800x600_zps6201be25.jpg

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1746_800x600_zpsb4d6dfe1.jpg

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1745_800x600_zps18df83e6.jpg

http://i369.photobucket.com/albums/oo140/Stumedic/03-A4%20Sortof/DSCF1754_800x600_zps87134480.jpg

The Allen head screws are in the base temporarily until I get the shimming right-then they'll be replaced with Fillister's. The flash brings out the "Patina" but in regular light the receiver is a nice green, and the scope base and rings are darker. Everything is Remington, with the exception-I think-of the striker.

[axemurderer]

Stu

That is real purty. I am thinking about doing this to my sporterized 03A3. just need a decent stock. I have two upper hand guards you could check out. I do have one question though. Is that scope mounted correctly?

Mike

[Punch The Clown]

Yup. the scope is mounted correctly. Eye relief is perfect. I tried to imitate the Lyman Alaskan. Here's a pic of the Alaskan.

http://i369.photobucket.com/albums/oo140/Stumedic/Alaskan_zpsbdc0c776.jpg

[axemurderer]

OK I guess that all those years of shooting deer rifles it just looks wrong to me. On the interwebs I have seen them both ways.


Yup. the scope is mounted correctly. Eye relief is perfect. I tried to imitate the Lyman Alaskan. Here's a pic of the Alaskan.

http://i369.photobucket.com/albums/oo140/Stumedic/Alaskan_zpsbdc0c776.jpg

[timshufflin]

I think the handguard is walnut Stuart.

[Punch The Clown]

OK I guess that all those years of shooting deer rifles it just looks wrong to me. On the interwebs I have seen them both ways.

The Alaskan is a 7/8 scope. If you look you'll see how close the bell and the lock come to the scope base. That is the reason for the mill cuts that Tim did on mine. I don't have a clearance problem right now but if I went to an Alaskan or a K2.5 I would have. The 03-A4 uses low scope rings so unless you have an original WWII base, or a friend that knows how to mill, you're locked into using medium scope rings.

[Punch The Clown]

OK I guess that all those years of shooting deer rifles it just looks wrong to me. On the interwebs I have seen them both ways.

The Alaskan is a 7/8 scope. If you look you'll see how close the bell and the lock come to the scope base. That is the reason for the mill cuts that Tim did on mine. I don't have a clearance problem right now but if I went to an Alaskan or a K2.5 I would have. The 03-A4 uses low scope rings so unless you have an original WWII base, or a friend that knows how to mill, you're locked into using medium scope rings.