View Full Version : Muzzle Wear Gauges Or Pin Gauges?
Punch The Clown
12-06-2013, 07:26 PM
I have always used a muzzle wear gauge. I just decided to try my pin gauges. On a rifle with a 1.5 reading on a wear gauge, a .300 pin just makes it in snugly all the way while a .301 goes in about 1/16" before stopping dead in it's tracks. What is the more accurate way to go? Of course I'm going to dig out my mic and check the gauge.
Orlando
12-06-2013, 08:04 PM
There ya go, MIC the gauge. Mine is dead nutz on
timshufflin
12-06-2013, 09:39 PM
i mic'd my gauge, .0005 off.
Punch The Clown
12-06-2013, 09:53 PM
i mic'd my gauge, .0005 off.
That's the diff between a 1 and a 1.5 or a .5 on the gauge.
Punch The Clown
12-06-2013, 10:19 PM
OK, I just mic'd the muzzle gauge and the pin gauges and they're both spot on, so if I took a little over 1/16" off my barrel the nuzzle wear would go down to almost none? Makes you re-think muzzle wear.
Orlando
12-07-2013, 08:40 AM
Low Muzzle wear measurememnts is mostly a selling tool, proof of accuracy is in the shooting
Old Guard
12-07-2013, 04:05 PM
OK, I just mic'd the muzzle gauge and the pin gauges and they're both spot on, so if I took a little over 1/16" off my barrel the nuzzle wear would go down to almost none? Makes you re-think muzzle wear.
Dammit, so, now?? I have an old barrel i finally pulled off, it shot great...did not like the .30 bullet test..Guess what?? I matters as to WHOM made the bullets, They check different too....So now I just got my HOLY GRAIL muz guage from CMP, Ya mean I need to MIC that TOO??Just sayin..Og.
musketjon
12-27-2013, 03:56 AM
OK, I just mic'd the muzzle gauge and the pin gauges and they're both spot on, so if I took a little over 1/16" off my barrel the nuzzle wear would go down to almost none? Makes you re-think muzzle wear.
That's probably the depth of the crowning.
Jon
Old Guard
12-30-2013, 10:48 AM
How many other folks here, don't like back boring a rifle? I did have mine done this summer, it seems to have helped..it is cut about 1/4 inch back. The smithy said it most likely would help it shoot better.?
Punch The Clown
12-31-2013, 05:57 PM
How many other folks here, don't like back boring a rifle? I did have mine done this summer, it seems to have helped..it is cut about 1/4 inch back. The smithy said it most likely would help it shoot better.?
Musketjon had one done, I think.
Old Guard
12-31-2013, 06:01 PM
Musketjon had one done, I think.
Punch, How is that Bite?? Any swelling? I'm Concerned about any break in the skin caused by an animal...Besure to watch for discoloration and any white discharges..I have has Cellulitious, and it is terrible....
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.