PDA

View Full Version : Pro's and Con's of going, or not going with, the BM59 gas cylinder?



Corpsie
07-14-2014, 03:40 PM
What are the pro's and con's of going with or not going with the BM59 gas cylinder?
https://www.standardpartsllc.com/productcart/pc/viewPrd.asp?idproduct=413&idcategory=26

I see lots of them in the Mini-G picture thread, but can't for the life of me find many reasons why except

1. Looks
2. The Ultimak rail doesn't require extra work to install (which is negligible since the $$ saved to have it installed ends up being spent on the BM59 gas cylinder).
3. Different muzzle devices can be used if this part gets threaded https://www.standardpartsllc.com/productcart/pc/viewPrd.asp?idproduct=399&idcategory=26

Is there anything else?

What would the cons be? Are there even more parts that need to be bought to make it work?

timshufflin
07-14-2014, 08:41 PM
The biggest pro is you get the gas cylinder and the brake for not much more then just the cost of most brakes and you don't have to modify anything for scout rails. The con is that you are limited to a drop down brake with the 59 cylinder.

jbkf1003
07-14-2014, 10:05 PM
As I understand it using the Ultimak with a standard gas cylinder requires shaving the oprod as well, not just modifying the ultimak. This was the clincher for me.

ou719
07-14-2014, 10:40 PM
Wouldn't a pro being the op rod is less curved and straighter thus stronger.

jbkf1003
07-15-2014, 08:24 AM
Bipod mount.

Corpsie
07-23-2014, 04:03 PM
After thinking about it, I don't really want a muzzle brake and having a flash suppressor would just add length which goes against having a shorter barrel. I'll just stick with the non-BM59 parts

timshufflin
07-23-2014, 06:47 PM
Wouldn't a pro being the op rod is less curved and straighter thus stronger.


The oprod is already so short on a G that is is very rigid.

Corpsie
07-25-2014, 03:43 PM
Then again, the pointy-pokey flash suppressors are so cool :(