WTB Standard parts drop down Gas Cylinder

[jbkf1003]

He's out of stock. Looking for one for a Mini-G build.

Thanks
Justin

[ordmm]

He's out of stock. Looking for one for a Mini-G build.

Thanks
Justin

A little clarification. Yes, we have none of the Repro BM62/69 cylinders available for sale. WE DO have plenty of original BM59 gas cylinders. Right now, we have stripped ones available. Later this week we will have complete assemblies with the sight system.

Greg

[jbkf1003]

Sorry sir, didn't mean to speak for you. I just was hoping to avoid the "Try Standard Parts" reply. Yes I am looking for one of the repros, without the sight system. If I have to I may go that route. The real reason is I want to run an Ultimak, but don't really want to have Tim have to machine my oprod and mount.

Thanks
Justin

[ordmm]

Sorry sir, didn't mean to speak for you. I just was hoping to avoid the "Try Standard Parts" reply. Yes I am looking for one of the repros, without the sight system. If I have to I may go that route. The real reason is I want to run an Ultimak, but don't really want to have Tim have to machine my oprod and mount.

Thanks
Justin

Justin, no problem....actually you may have opened up a good point for discussion. There should still be a fair ammont of the stripped BM gas cylinders and some complete ones out there. There is also people wanting to do a "drop down" gas cylinder build. So maybe someone can come up with plug for the spindle valve hole on the stripped gas cylinders. We had tig welded a couple to close up the spindle valve hole and the detent grooves. Was no issue for our guy to weld them, just don't have time to have the weld machined off smooth and recoat the cylinders---maybe down the road will have time, but just not right now. So maybe there's a rework opportunity out there for some enterprising capitalistic soul. Best answer, in my opinion, (and Stu I think came up with the idea) would be to make an M14 look-alike spindle valve to eliminate the grenade launching sight. Or, (and know of one case where it was done) come up with a allen head like dowel that is pinned on one end. Of course you have to drill a gas port hole. Just throwing all this out there. If it's OK with Shuff maybe some will chime in with a good rework idea. I sure would be interested.

Greg

[jbkf1003]

Nobody has one of these laying around?

[Punch The Clown]

Greg, I for one would be in for a tig welded gas cylinder. I will have the finishing work done myself. Stu

[jbkf1003]

I'm with Fizbo. I'm sure I could grind it flush or have someone do it...

[Punch The Clown]

One person, just one person asks for a tig welded gas cylinder Greg may think he's really sick and
just ignore him. And if two people, two people do it, in harmony
Greg may think they're both faggots and they won't get gas cylinders either.
And three people do it, three, can you imagine, three people posting on the forum
Singing a bar of I Want A Gas Cylinder and logging out. Greg may think it's an
Organization. And can you, can you imagine fifty people a day, I said
Fifty people a day logging on and postin' a bar of I Want A Welded Gas Cylinder and
logging out. And friends he may thinks it's a movement

And that's what it is , the I Want A Tig Welded BM59 Gas Cylinder Movement, and
All you got to do to join is sing it the next time it come's around on the
forum.

With feeling. So we'll wait for it to come around on the guitar, here and
Sing it when it does. Here it comes

You can get anything you want, at Standard Parts LLC
You can get anything you want, at Standard Parts LLC
Post right up and nag the ex-hack
Next thing you know gas cylinders will be back
You can get anything you want, at Standard Parts LLC

[jbkf1003]

You can get anything you want, at Standard Parts LLC

Sounds good to me, but then he may have to change the name of his company, as the parts wouldn't be so 'Standard' anymore..

[jbkf1003]

bump. Still looking

[gman366]

If you can't find one, I have an extra drop-down cylinder & bipod, plug , & sight. If you are interested, please contact me at [email protected]. Tony Giacobbe

[jbkf1003]

Thanks Tony, I was able to find one though.

Justin

[DanII]

I too need a drop down cylinder. I have a stripped one, but no way to block the port.

Regards,
Dan

[timshufflin]

I too need a drop down cylinder. I have a stripped one, but no way to block the port.

Regards,
Dan

I can do that, contact me by email and I'll give you the cost and what it would look like.

[DanII]

email sent.
contact me at [email protected]