WTB BM59 Parts

[flying2275]

I am looking for the front mag catch hollow pin and a bolt stop spring for a BM59.

Also looking for a PB windage knob and PB hammer.

If you have either of these for sale please let me know. Found All Thanks

Thank you

[seaninmich]

NOS PB windage knob

http://www.thestockemporium.com/pb-windage-knob-nos-unissued?ReturnUrl=LwBwAGIAYgBtAGIALQBnAGEAcgBhAG4 AZAAtAHAAYQByAHQAcwA%3d

[Punch The Clown]

You probably already have tons of bolt stop springs in your house. Although you can run down to your local auto parts store and find a Dorman spring that may work the spring from a ball point pen trimmed to size is perfect. If you need the 8mm hollow pin PM me and I'll mail you one. Stu

[Eli]

The front pin doesn't need to be hollow unless the gun is select-fire. If there's actual demand, I can have a machinist friend make some solid ones for reasonable money.

Eli

[flying2275]

You probably already have tons of bolt stop springs in your house. Although you can run down to your local auto parts store and find a Dorman spring that may work the spring from a ball point pen trimmed to size is perfect. If you need the 8mm hollow pin PM me and I'll mail you one. Stu

Thank you for the suggestion and offer.

[timshufflin]

I have the front pins in stock. They are not to "spec" but they work and are hollow.

[Punch The Clown]

Already mailed.

[flying2275]

Already mailed.

Thanks again!

[gman366]

If the front hole in the receiver has not been reamed out, & it will take the op rod catch pin, I have adaptors that will fit, & I will send you one.