Rifle values???

[SYoung289]

I have a nice looking Garand Springfield serial #904097. It’s supposed to be era correct, 1942, and I had a local guy tell me it was worth quite a bit of money. Problem is it has failure to extract and eject and feed. Something I’ve never experienced with a Garand. Oh and the trigger assembly falls out under recoil. I took it to shop in Fresno, guy told me all the problems I am having was due to the stock being compressed and recommend I Change the stock.

So a couple questions.

Is this rifle worth putting serious money into?

Is it worth the money to buy the era correct parts to keep it stock?

Am I better off selling this thimg to a collector and just filing the paperwork for another H&R from CMP?

Thanks guys

[timshufflin]

It if is indeed correct, give the chamber a good cleaning and sit on it or sell it. Many times a good chamber cleaning on these will cure FTE issues.

[SYoung289]

Wilco Tim. Thank you for the reply. I was showing off my H&R last night and it refused to take the enbloc clip.... turns out I fixed the issue after 20 min worth of fiddling with it. But that pisses me off too. I guess I don’t have a reliable Garand. That H&R just may get shipped to you for some work now that I completed my escape from CA.

[seaninmich]

If the rifle is absolutely, and undeniably, ORIGINAL, then it’s worth about $3000 in today’s market. If it’s just correct, or corrected, it’s worth about $2000. If it’s neither, figure about $1000.

[SYoung289]

seaninmich,

Thats what I was originally told, by said acquaintance in Fresno. Im glad to hear that and I appreciate the info. Hopefully it is what was claimed. Ill polish up the chamber nice with some Ballistol and go hit the hills and try it again. My faith got shook in my rifles the last couple of times I have took them out.

[jak]

If the trigger assembly falls out after every shot, then either the stock wood is compressed or the trigger guard locking lugs are flattened /"D" shaped or both.
Swapping out the trigger guard should be tried first.

[JGW]

If the trigger assembly falls out after every shot, then either the stock wood is compressed or the trigger guard locking lugs are flattened /"D" shaped or both.
Swapping out the trigger guard should be tried first.

I had this exact issue a couple of months ago. I bought a NOS trigger guard ($35 (?)) and it fixed the problem. I wouldn't pass on the rifle (if it is otherwise a good deal) based on this problem.

JGW

[musketjon]

I had this exact issue a couple of months ago. I bought a NOS trigger guard ($35 (?)) and it fixed the problem. I wouldn't pass on the rifle (if it is otherwise a good deal) based on this problem.

JGW

One has to make sure of the correct trigger guard if the rifle is to remain "era correct". There are more than 2 options.
Jon

[SYoung289]

Agreed. Swapping the trigger group is a fantastic idea. I can switch trigger assembly’s out of my H&R and see if there’s any difference. If it works, I can start my hunt for a “correct” piece.

[Prince Humperdink]

Perhaps you could take some pics of the rifle,and all of it's components.We can verify if it is "correct",or not?

[SYoung289]

Prince; I’ll see if I can get some pics took after work and figure out the image hosting. I’d appreciate any help I can get.

[SYoung289]

2450 2450 2450 2450 2450 2450 2450 2450 2450

There ya go boys. See if my image hosting worked

[SYoung289]

Why the hell did that happen? Really pisses me off, I spent 35 min trying to get my pics up
I hate photobucket

[SYoung289]

2451 testing?

[timshufflin]

photobucket sucks, try imgur

[seaninmich]

You can no longer post photobuckey pics anywhere on the net unless you pay them $400 a year

[SYoung289]

Imgur it is.....

[Orlando]

Any pics yet? Be sure and post a close up of the windgae knob

[SYoung289]

https://imgur.com/gallery/jeODP

Is this the way this works? I’m trying here.

[Orlando]

Op rod has been modified with cut, rear sight has been changed to type II. Is the gas screw single or cross slot, is there a seal over the front sight screw? Nice rifle

[SYoung289]

Doesn’t seam to have any seal I can see over the front sight screw. Gas plug is the straight slot early type.
Thank you. She’s beautiful to me. Just have to get her to cycle.

[Orlando]

PM sent, if you need help let me know

[musketjon]

Looks like the gas cylinder needs to be moved rearward a bit.
Jon