Printable View
I've been kicking it back and forth since i bought it and I finally decided to turn my 6 digit into a Mini-G.
Tim, when I get a new stock to send with it and I get my milled stock ferrule swapped out with Dupage, I'm sending it to you. Work your magic.
I figure this is a good way to spend my Ohio veteran's bonus.
$clapper$
Good for you Redheep! I sent Tim a 6 digit and have been in love with it ever since.
Mike
I'm excited. It's got a SA 52 barrel on it that I think I'll just have Tim shorten. Otherwise, it's just a bunch of mixed up parts.
I want it to look like a WW2 mini, so I put the milled trigger guard, stock ferrule and lockbar sight on it. Just enough to make you wonder.
It needs a new stock, so I think I'll have Tim cartouche one for the time period and then I'll finish it up.
I have a question about the order form.
I want the Mini-G conversion -$525
Park the rifle - $50
Smith MB - $150
And a trigger job - $45
Are the precut barrels new manufacture or old take offs? For example, if I was looking for a old barrel like a 40's date to go with the 6 digit serial number, would you have one?
Otherwise, I'll just take what you put on there. Originality is out the door at this point.
Is that all I need to check on the order form?
Tim,
It took a lot longer than I thought it would, but I put my rifle in the mail today headed your way. Looking forward to it.
Barrels are take offs. I don't have Smith brakes, I use E brakes. I'll never use another Smith product again. I doubt I'd have a 40's barrel to use. I take your barrel, put it in a pile with the rest, then do barrels in batches for other Mini-G's. That why your barrel has to be in decent condition. Must be a 5 or less at the throat with very very little frosting or pitting, the kind I'd need a magnifying glass to find.
The posts above are from 2 years ago. My order form is correct for what I'd like to have done now.Quote:
Originally Posted by timshufflin
You should take the Smith brakes off your website if you don't intend on using them. I included the $150 for a muzzle brake, if that's not the right amount please let me know. I also included the $25 to use my barrel, if that's not feasible because of the condition I understand.
I will take the smith off, thought I did, I probably had it in more than 1 spot. The cost is the same for the three inch bm brake if you want it. When using your own barrel, condition doesn't matter.
I definately want the brake on it. Thanks. I put a letter in with the money order just in case something was lost in translation.Quote:
Originally Posted by timshufflin
My apologies if there was confusion by bumping this thread up. I didn't realize the unanswered posts would look like current questions.
YOU WILL LOVE IT.Fantastic deer gun.Quote:
Originally Posted by redheep