Printable View
Project gun for this winter. 1903 (1918 serial number range, slightly over 800k), with a 4-30 4-groove barrel. The rear sight has been butchered, and I'm curious as to what I need to get it back to original. Got one picture of it before my camera died, so I hope it's enough to tell. Even in the shape it's in, I figured that it was hard to pass up for $150.:)
http://i280.photobucket.com/albums/k...psdugbnopr.jpg
Good deal. The action alone should be worth that.
Just bring it by,and we'll go shooting.
$150?!?!?! Score!
When you get a chance add some more pics, especially of the top of the receiver.
I want more pics. Charge that camera.
Show us some pictures of what is bad, I have alot of small parts for 03s and may be able to help with small parts. Sounds like a fun project.
Here's the rest of 'em. Sorry I took so long.:o
Top:
http://i280.photobucket.com/albums/k...psisjhxvmw.jpg
Horribly-butchered rear sight:
http://i280.photobucket.com/albums/k...psuk7ylkpg.jpg
Trigger area w/ faint cartouche:
http://i280.photobucket.com/albums/k...pszvby1hbj.jpg
Another good shot of the rear sight travesty:
http://i280.photobucket.com/albums/k...psjmprapar.jpg
The main reason I need a new stock:
http://i280.photobucket.com/albums/k...psjltanto8.jpg
Floorplate:
http://i280.photobucket.com/albums/k...psixpustvz.jpg
I'll check my box for any 1903 rear sight parts,I may still have some?
Found a rear sight on Ebay for $20, so the rebuild begins!$clapper$
Been a few months, and my winter project has turned into a summer project. Got the forend section to fix the stock, and now have an upper band and handguard on the way right now. Haven't fired a shot from anything since last fall, so this will be an great excuse to burn a few (dozen) rounds once it's all back together.
https://media.riffsy.com/images/b650...a3725cf360/raw
Why haven't you brought it by,Kit?
An excellent question, Ryan, and I'm embarrassed to say that I haven't yet.
The rest of the parts showed up a couple days ago, so now comes the fun part. Assembly. $clapper$
The Prince, laying down the gauntlet!Quote:
Originally Posted by Prince Humperdink
Mission accomplished. I think I might have to keep this one for a while.:) Can't take a decent picture to save my life, but here they are.
http://i280.photobucket.com/albums/k...psfpa6smtx.jpg
http://i280.photobucket.com/albums/k...psv65o5xvq.jpg
http://i280.photobucket.com/albums/k...psuq3uekks.jpg
http://i280.photobucket.com/albums/k...ps7pbk2svb.jpg
http://i280.photobucket.com/albums/k...psdldn8chs.jpg
http://i280.photobucket.com/albums/k...ps4ue18qix.jpg
http://i280.photobucket.com/albums/k...psnlzzu6x9.jpg
Ended up going over everything again. Didn't like the way the patch job looked on the forend. Ended up going with a C stock from Boyd's. It wasn't until I got it all back together, again, that it dawned on me I forgot the reinforcing screws that were supposed to go in the stock. Oops. Anyway, here's how it looks now. I know the stock isn't correct, but that pistol grip sure feels nice. I'm still not a photographer, either.$vomit$
https://farm5.staticflickr.com/4489/...cfd7595d_b.jpg
https://farm5.staticflickr.com/4472/...f4d5386a_b.jpg
https://farm5.staticflickr.com/4476/...f2caf1d5_b.jpg
Looks good. Don't shoot it without the screws. Make sure the bushing for the rear tang screw is installed and give yourself plenty of clearance between the back of the tang and the stock.
Yeah, I felt (and still do) so stupid for leaving out the screws. Got a bit excited, and ahead of myself, to finally have it all done after God knows how many hours working on the stock. There had to have been at least 1/8" of extra wood to remove, everywhere. Fun project, though, all things considered. This is actually the second Boyd's stock. The first one arrived with a big chunk gouged out of the magazine well. Emailed them pictures of the damage, and they made it right. They didn't sound too happy that something like that was cleared to sell.
It looks fabulous.