I need a short muzzle brake, either a BM62 or BM59E muzzle brake.
Thanks,
Jeronimo
Printable View
I need a short muzzle brake, either a BM62 or BM59E muzzle brake.
Thanks,
Jeronimo
62 you ain't finding so fast. 59E you have a chance.
You know they don't interchange, right?Quote:
Originally Posted by Angleofattack
Eli
Hello Eli,
After I posted the request I started thinking about it and I thought about the gas pressure... then here I am to correct my post! Here is my dilemma. I have a BM-62 that I want to sell. It is mint, have the original box, manual, etc. But the rifle does not fit in the box, because it has installed one of those rare brakes as they came in the Mark I, with bayonet lug, but not grenade launcher. Interestingly enough, this is not the first Berben import that I see with that brake. I believe some came from Italy with this brake, or Berben was selling them as an option/accessory. I have seen at least three BM-62s with these brakes. But what puzzles me is that it does not fit in the box with it. I would like to keep that brake for my BM59s, but sell the BM-62 if possible with a brake that makes it fit the box, and that would be the original short unported muzzle tip.
Thoughts?
Check these links.
https://www.legacy-collectibles.com/...m62-rifle.html
https://www.collectorsfirearms.com/p...d-t-r6921.html
https://i.postimg.cc/Y9DNF2g9/wm-14866770.jpg
That is a rare rifle for sure. The original muzzle device is rarer than a hens tooth. I managed to get two of them for my builds-but that was years ago. I got one from Mike Baker and the other from Greg at Standard Parts.
But did you see the other links? Rare but not unique.
Reese sold those for fairly cheap for years, I bought one for my BM62 but sold them separately.Quote:
Originally Posted by Angleofattack
The interchange issue between the SL/E and other BM59-series rifles is due to the different gas cylinders, the SL/E uses a standard Garand gas cylinder that has closer bore centers than the standard BM59 cylinders.
Beautiful rifle, by the way!
Eli
If your in need of a BM62 BM69 style short brake link below.
Won't work on an "E" model or standard Garand gas cylinder....but at least your rifle will fit in the box.
https://www.standardpartsllc.com/pro...60&idcategory=
Yow, $$$. I'd like to have one, but that's a bit too pricey for moi, guess I'll just have to drill holes in my "builder" gas lock. ;)
Quote:
Originally Posted by Nihontochicken
What's too pricey, The Standard Parts short brake? that's less than half the cost of the 5" brake in your photos