Mini-G Pic Thread

[timshufflin]

Mine is a Losoks mount but I recommend the m14.ca mount. Mine is drilled and tapped.

[toolman]

My only G left, the rest of my Garands are a standard HRA, EMCF SA, a BM14, and BM59's. This is my 35 Whelen G. It is a very good shooter (minute of heart at 300 yards) and is built from every poor part known to man. It has an old rusty sewer pipe barrel turned into a crystal clear and shiny barrel. It also has an Oprod with a hole in the bend, trigger guard with lugs I made and re soldered in, butt plate with no checkering, stock that was broken in half and I screwed and glued it back together, receiver has a broken toe on the right leg and I welded it and soldered it back on, oprod catch was missing the accelerator so it's now a holbrook type catch, gas cylinder had a dented in stacking swivel retainer hole so I ground it off for this rifle.

Attachment 1407Attachment 1408Attachment 1409Attachment 1410

Such a humble man!! peace toolman

[jbkf1003]

My 2nd. Mag Fed 308. Built off a CMP Grade B Receiver and a pile of parts. I plan on getting out on memorial day to Christen her...

These were in another post, but figured I'd throw them in here anyway...

[garandtom]

jbkf1003, what muzzle brake is that?

[jbkf1003]

BM59E, a Beretta BM59 brake made for standard garand gas cylinder.

https://www.standardpartsllc.com/pro...&idcategory=26

[garandtom]

Thats a damn nice rifle!

[centurion20000]

Here's my humble contribution for the collection. The mini Red / Green dot makes it a shorter range rifle (200 - 400m) but that's ok as it makes one heck of a brush gun now.

20140526_132337.jpg

I think I can carry enough ammo now

[jbkf1003]

Looks good. Is that a hopco mount? or Maybe a m14.ca MRD Picitinny mount?

[centurion20000]

I went with an M14.CA RD mount. Retains a non-adjustable rear sight and the scope. Tried putting Cabela's new 3X Prism scope on it but it was just too high [couldnt get a decent cheek weld]. This did make me realize that there is a possible market for a lowered rear sight pictinny that sits just above the rear sight adjustment rod and behind the rear sight.

This is THE gun if you want a 30-06 for a 3 gun competition.
Why would you want that? Have you ever heard of something needing a double tap with a 30-06?

[HerkyBird]

How do you like that Olongapo grab-n-go? I've been pondering a purchase of one.