Results 1 to 7 of 7

Thread: Another 'Help' Question

  1. #1
    Senior Member
    Join Date
    Nov 2013
    Location
    Central Ontario,Canada
    Posts
    165
    Rep Power
    12

    Another 'Help' Question

    This time it is trigger group related. It seems that there a few folks up here in The Great White North think I an The Wizard of Garands. No, I am just a hobbyist that likes to make them work. Today I received in the mail an packet with what may be a hand grenade in it. Safety not working and so disassembly ensued. First mistake was trigger pin out with the hammer cocked. Second mistake was removing hammer pin. So.... send it to me. I look at it and am wondering what part should be sacrificed to get this thing apart. Any suggestions guys? I am up for any suggestions. Thanks upfront, ZB.

  2. #2
    Founding Member seaninmich's Avatar
    Join Date
    Apr 2011
    Posts
    2,277
    Rep Power
    45
    you shouldn't have to sacrifice anything. if you lack the hand strength, use a couple clamps to push everything into the position it should be. reinstall the hammer pin.
    [SIGPIC]

  3. #3
    Moderator Punch The Clown's Avatar
    Join Date
    Apr 2011
    Posts
    3,859
    Rep Power
    64
    In a daze I once did the same thing. It was like a rubiks cube but as Sean said it will come apart
    When dealing with liberals, always attribute to malice what would ordinarily be attributed to incompetence.

    "Of course it won't be easy; nothing worthwhile ever is. That is why I have always failed where others have succeeded."-Clouseau

  4. #4
    Moderator Orlando's Avatar
    Join Date
    Apr 2011
    Location
    Ohio
    Posts
    3,626
    Rep Power
    60
    Use a punch that is alittle smaller than the trigger or hammer pin and work it into the hole and pry the trigger or hammer back into position. Pull trigger to release hammer. Then disassemble as normal
    "I am the master of my unspoken words, and a slave to those that should have remained unspoken. ...



    "Official 2010 Mini-G & 2011 Summer Postal Shoot Biggest Looser"

  5. #5
    Founding Member Prince Humperdink's Avatar
    Join Date
    Apr 2011
    Location
    Montana
    Posts
    2,947
    Rep Power
    51
    Quote Originally Posted by Orlando View Post
    Use a punch that is alittle smaller than the trigger or hammer pin and work it into the hole and pry the trigger or hammer back into position. Pull trigger to release hammer. Then disassemble as normal
    This is the method that I've used.
    "The advantage of being armed, which the Americans possess over the people of almost every other nation ... forms a barrier against the enterprises of ambition, more insurmountable than any which a simple government of any form can admit of." -- James Madison (1788)

  6. #6
    Senior Member
    Join Date
    Nov 2013
    Location
    Central Ontario,Canada
    Posts
    165
    Rep Power
    12
    At this moment I have thrown it in the 'Fookin' piece o' crap bin'. I have lost any patience I had on this thing and will just leave it be until I am in a sane state of mind.

    Thanks for the suggestions folks.

  7. #7
    Moderator Punch The Clown's Avatar
    Join Date
    Apr 2011
    Posts
    3,859
    Rep Power
    64
    Have a beer, soak in the tub, and have another look at it tomorrow. I just did the same thing recently on an M14. It will go back together, and then come apart the correct way.
    When dealing with liberals, always attribute to malice what would ordinarily be attributed to incompetence.

    "Of course it won't be easy; nothing worthwhile ever is. That is why I have always failed where others have succeeded."-Clouseau

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •