Results 1 to 6 of 6

Thread: New Reloading Bench Project.... or what to do with slate table top and pile of wood!

  1. #1
    Junior Member
    Join Date
    Aug 2012
    Location
    Ohio
    Posts
    65
    Rep Power
    0

    New Reloading Bench Project.... or what to do with slate table top and pile of wood!

    Thought I would share with the group the project that was my reloading bench...

    I have been acquiring equipment for some time, and I now have a Hornady Lock n Load AP Progressive Press, Lee dies for 45 Colt (w/Factory Crimp Die), Redding 45ACP Dies, Redding 30-06 dies, and Hornady PTX Expanders as well as Powder Cop. I also have a Hornady digital bench scale, and case tumbler.

    None of this is very special though because lots of folks have and run these setups... what I think is special, is my bench to put it all on. I had an old slate pool table in my basement for several years. The felt was all worn, and the table hardly ever got played. I disassembled the table, and tossed out the wood components and felt for the trashman - but kept the 3 pieces of heavy slate. It was one of those pieces of slate that I decided to use for this project. The slates are very heavy, very thick, and very flat. I thought... what a good idea for a top for a workbench! I constructed a table frame using 4x4 boards. The table is held together on multiple points using 6" lag bolts, and 'L' brackets on inside corners with 2" bolts. The whole frame is secured to my concrete basement floor. The slate was secured to the main 4 posts using 3" lag bolts. I drilled extra holes through the slate and the 4x4 below that with my DeWalt hammer drill and used those holes to mount a small bench vise and my Hornady LnL press. The slate was then painted with Dutch Boy concrete paint in Battleship Gray. The wood was all stained with MinWax 'Special Walnut' stain.

    This thing is ROCK solid... Needless to say I'm pretty impressed with myself and this whole project that came from a brain fart to a real workbench.











    Brutus likes it!


    St. Florian watches over to make sure I don't blow something up.


    Enjoy![/QUOTE]

  2. #2
    Infidel dogboysdad's Avatar
    Join Date
    Apr 2011
    Posts
    933
    Rep Power
    25
    Where are you in Ohio?
    "I have absolutely no idea why you would trust something as important as your life to the people on this forum." Fogtripper 1-6-10

  3. #3
    Founding Member jak's Avatar
    Join Date
    Apr 2011
    Location
    Eastern PA
    Posts
    1,076
    Rep Power
    27
    Nice job !!!
    I really like the workbench's side pockets.
    John

    Don't worry if plan "A" fails, there are still 25 other letters in the alphabet.

    Looking for S/A bayonets s/n 922033 & 1045220


    Proud Member of M1CC #112

  4. #4
    Administrator timshufflin's Avatar
    Join Date
    Mar 2011
    Location
    Jerome
    Posts
    7,135
    Rep Power
    10
    I like it but I'm weary. I just don't believe that the thing could suffer much in the way of a shock.

  5. #5
    Junior Member
    Join Date
    Aug 2012
    Location
    Ohio
    Posts
    65
    Rep Power
    0
    To be honest, when this was still a pool table, and after I ceased to use it as a pool table, before I finished my basement - I used the pool table as a workbench of sorts for many things and this thing took some whacks and abuse. I know slate has a reputation for being brittle, but when it's this thick and heavy, it's pretty stout. I probably have about 5k rounds of reloads through it so far, and no issues yet. If I do ever have a crack or something, I still have two more pieces left

  6. #6
    Patriot tljames's Avatar
    Join Date
    Apr 2011
    Location
    Western Oklahoma
    Posts
    342
    Rep Power
    17
    Looks really nice! Also like your progressive press! I had the auto case loader on mine, worked pretty well, but then one day a casing hung up in the dispenser. I didn't notice until it was too late. The lil motor bound up and burned up. So rather than replace or repair I removed it. Really hasn't slowed the process too much. Fun press to use sure can kick out the pistol ammo!

    Good Shooting All! The Hoser
    Have you ever heard anyone complain about having ammo left over after a gunfight?"


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •