Results 1 to 3 of 3

Thread: Back in the Saddle Again.

  1. #1
    Senior Member
    Join Date
    Nov 2013
    Location
    Central Ontario,Canada
    Posts
    165
    Rep Power
    12

    Back in the Saddle Again.

    Hey folks, it's me ZBeast, and I have been out the picture for a bit. I am back in the build game here in Canada once more and have need of some Garand expertise. I have decided to try my hand at replacing the pistons on a few out of spec op rods that are sitting on my shelf and my questions are, what grade of stainless steel is needed for making a new piston? Next is what is the overall length of the oprod? Max/min ? Some of the old pistons are thinner than others and I cant find any information on what the head of the piston should be. Thanks upfront, ZB.

  2. #2
    Moderator Punch The Clown's Avatar
    Join Date
    Apr 2011
    Posts
    3,863
    Rep Power
    64
    Garandparts, Sarco and a couple of others have replacement tips. They have to be brazed in. Not very hard with the right silver solder and flux.
    When dealing with liberals, always attribute to malice what would ordinarily be attributed to incompetence.

    "Of course it won't be easy; nothing worthwhile ever is. That is why I have always failed where others have succeeded."-Clouseau

  3. #3
    Founding Member musketjon's Avatar
    Join Date
    Apr 2011
    Location
    So. Commiefornia
    Posts
    1,099
    Rep Power
    27
    Hey Stu,
    How're you doing?
    Jon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •